Best Rust Converter in Australia 2027: 7 Rust Converters and Removers Compared
By Anish Puri·Last checked 20 November 2026·9 min read
The best rust converter for most people is the Rust-Oleum Automotive Reformer Spray: its listing says it bonds with rust, turns it into a flat black, paintable surface and dries tack free in 20 to 40 minutes. For rust you want off rather than converted, choose the Evapo-Rust soak, and for a brush on converter primer, Corroseal.
The best rust converter for most people is the Rust-Oleum Automotive Reformer Spray, because its listing says it bonds with rust and turns it into a flat black surface ready for paint, saving hours of sanding. This page compares 7 picks from 7 brands, five whose listings say they convert rust and two that say they remove it, using only what each listing states.
A converter leaves a surface for paint; a remover takes the rust off. This guide covers rust on metal, not stains. Our car wax guide compares 13 waxes that protect a car's paint, a different job from treating rust.
Pick
Converts or removes
How it goes on
Size
Time the listing gives
Colour the listing gives
Rust-Oleum Automotive Reformer Spray
Converts
Spray, any angle
291 ml (title and volume row); size row reads 291 g
Tack free in 20 to 40 minutes; fully paintable after 24 hours
Flat black
Evapo-Rust The Original Rust Remover
Removes
Soak, item completely submerged
3.78 litres
Minutes (bullets); at least 30 minutes, or 12 to 24 hours for stubborn rust (Directions)
not stated
Corroseal Water Based Rust Converter
Converts and primes
Brush, roller or spray
946 ml
Dry time 2 hours (spec table)
Black
WEICON Rust Converter
Converts and primes
Spray can
400 ml (title and bullets); size row reads 40 ml
not stated
Black layer (maker's section)
FORCH Korroplex Rust Converter
Converts
Painting, spraying or roller, also on damp surfaces
1 litre
Paintable after 3 hours; spec table full cure row reads 1 hour
White; converts rust to a blue black compound
Loctite Extend Rust Neutralizer
Converts
Liquid latex coating; method not stated
237 ml
Dry in about 20 minutes, full cure 24 hours (spec table)
Milky white coating; neutral black surface
Hammerite Rust Remover Gel
Removes
Non drip gel
100 ml
Removes rust in 2 to 3 hours
Clear
Best rust converter overall: Rust-Oleum Automotive Reformer Spray
Best rust converter overall: the Rust-Oleum Automotive Reformer Spray, because its listing says it bonds with rust and turns it into a flat black, paintable surface that seals out moisture, sprays from any angle and dries tack free in 20 to 40 minutes.
Top pick
Rust-Oleum
Rust-Oleum Automotive Reformer Spray
The Rust-Oleum Automotive Reformer listing says it bonds with rust and turns it into a non rusting, flat black surface ready for paint, from an oil based formula in a spray that works from any angle. It dries tack free in 20 to 40 minutes and is fully paintable after 24 hours; its title gives a 291 ml can, while its size row reads 291 g. It is rated 4.7 from 11,157 ratings, a global count.
$16.89$19.98
Save 15%
Amazon.com.au price as of 02:04 am AEDT, subject to change
As an Amazon Associate, NestPath earns from qualifying purchases.
The listing calls the product Rust Reformer and its title calls it a rust to paint converter, so here a reformer is a rust converter by name. The bullets describe an oil based formula that bonds with rusted surfaces and seals out moisture to prevent future rust, and an Any Angle Spray that works in any direction, even upside down. Its title and volume row give a 291 ml can, while its size row reads 291 g. It holds 4.7 stars from 11,157 ratings, a global count.
It suits trailers, trucks, cars and automotive parts, the uses its title and bullets name. The honest catch: it dries only to a flat black finish, and the listing says it is fully paintable after 24 hours.
Best rust remover soak: Evapo-Rust The Original Rust Remover
Best rust remover soak: Evapo-Rust The Original Rust Remover, because its listing says this water based remover takes rust off without scrubbing or sanding, contains no acids and is reusable.
Runner-up
Evapo-Rust
Evapo-Rust The Original Rust Remover
The Evapo-Rust listing describes a water based, reusable rust remover in 3.78 litres that takes rust off without scrubbing or sanding and contains no acids. Its bullets say minutes, while its Directions say to submerge the item and soak at least 30 minutes for light rust and 12 to 24 hours for stubborn rust. It is rated 4.6 from 13,152 ratings, a global count.
$72.33$78.50
Save 8%
Amazon.com.au price as of 02:04 am AEDT, subject to change
As an Amazon Associate, NestPath earns from qualifying purchases.
The Evapo-Rust bullets describe a water based remover that works in minutes, contains no acids, bases, solvents or VOCs, and will not harm unrusted steel or affect plastic, PVC, Viton and most paints. Its Directions give longer times: submerge the item completely in a container, then soak for at least 30 minutes for light rust and 12 to 24 hours for stubborn rust. The listing says the reusable 3.78 litres removes rust from up to about 136 kg of steel. It holds 4.6 stars from 13,152 ratings, a global count and the most on this page.
It suits tools, cast iron cookware, grill grates, auto parts and antiques, the uses the listing names; for a pan you would rather replace, our cast iron skillet guide compares new ones. The honest catch: its Directions say the item must be completely submerged in a container, and it is a rust remover, not a converter.
Best brush on converter primer: Corroseal Water Based Rust Converter
Best brush on converter primer: the Corroseal Water Based Rust Converter, because its listing says it converts rust and primes in one step with a latex metal primer, goes on by brush, roller or spray, and cleans up with soap and water.
Also great
Corroseal
Corroseal Water Based Rust Converter
The Corroseal listing describes a water based rust converter with a latex metal primer that paints, primes and converts rust in one step, goes on by brush, roller or spray and cleans up with soap and water. It holds 946 ml, and the listing gives coverage per 3.78 litres. It is rated 4.6 from 2,509 ratings, a global count.
$77.86$94.40
Save 18%
Amazon.com.au price as of 02:04 am AEDT, subject to change
As an Amazon Associate, NestPath earns from qualifying purchases.
The Corroseal bullets describe a water based converter with a latex metal primer that paints, primes and converts rust in one step. The listing gives about 18.6 to 23.2 square metres per 3.78 litres, and this size holds 946 ml, a quarter of that volume. The spec table gives a dry time of 2 hours and a black colour. It holds 4.6 stars from 2,509 ratings, a global count.
It suits the marine, automotive, general household and industrial applications the listing names. The honest catch: the listing gives its coverage for 3.78 litres rather than for its own 946 ml size.
Best spray converter for machinery: WEICON Rust Converter
Best spray converter for machinery: the WEICON Rust Converter, because its listing says it does rust and primer conversion in a single operation and names machinery, plant, agricultural equipment and cars.
Also great
WEICON
WEICON Rust Converter
The WEICON listing describes rust and primer conversion in a single operation on rusty cast iron and steel, good weather and UV resistance, and a spray can for machinery, plant, agricultural equipment and cars. The title and bullets give 400 ml, while the spec table size row reads 40 ml. It is rated 4.5 from 2,299 ratings, a global count.
$38.99
Amazon.com.au price as of 02:04 am AEDT, subject to change
As an Amazon Associate, NestPath earns from qualifying purchases.
The WEICON bullets describe the neutralisation of rust on rusty cast iron and steel, protection against corrosion indoors and outdoors, high hiding power and good weather and UV resistance. The maker's section says the spray forms a black layer that serves as a primer for the next coat. The title, bullets and spec table volume row give a 400 ml spray can, while the size and unit count rows read 40 ml. It holds 4.5 stars from 2,299 ratings, a global count.
It suits machinery, plant, agricultural equipment and cars in workshops, garages and outdoor settings, as the listing names. The honest catch: its 4.5 stars sit below the other four converters, and the listing gives no dry or paint over time for this converter.
Best converter for damp surfaces: FORCH Korroplex Rust Converter
Best converter for damp surfaces: the FORCH Korroplex Rust Converter, because the listing says it can also be used on damp surfaces and that 1 litre is enough for up to 25 square metres.
Also great
FORCH
FORCH Korroplex Rust Converter
The FORCH Korroplex listing describes a rust converter on a dispersion basis that can also be used on damp surfaces, applied at 5 to 40 °C, with 1 litre enough for up to 25 square metres. It can be painted over after 3 hours, while its spec table full cure row reads 1 hour. It is rated 4.7 from 917 ratings, a global count.
$61.02
Amazon.com.au price as of 02:04 am AEDT, subject to change
As an Amazon Associate, NestPath earns from qualifying purchases.
The FORCH bullets describe a rust converter on a dispersion basis that can be painted over after 3 hours and used on damp surfaces, applied at 5 to 40 °C. The description says it converts rust into a stable, insoluble blue black compound and acts as an adhesive enhancer for later paintwork. The spec table lists a white colour and a 3 hour dry time, while its full cure row reads 1 hour. It holds 4.7 stars from 917 ratings, a global count.
It suits rust on damp surfaces, which the listing names. The honest catch: it has the fewest ratings on this page, and the listing limits application to 5 to 40 °C and says not to use it in the sun.
Best for mild surface rust: Loctite Extend Rust Neutralizer
Best for mild surface rust: the Loctite Extend Rust Neutralizer, because the listing calls it a solution to mild surface rust that chemically converts rust to a neutral black surface ready to paint.
Also great
Loctite
Loctite Extend Rust Neutralizer
The Loctite Extend listing calls it a solution to mild surface rust that chemically converts rust to a neutral black surface ready to paint, and the description calls it a fast drying, milky white latex coating that acts as a primer. It comes in a 237 ml bottle. It is rated 4.6 from 1,860 ratings, a global count.
$41.27
Amazon.com.au price as of 02:04 am AEDT, subject to change
As an Amazon Associate, NestPath earns from qualifying purchases.
Loctite names this product a rust neutraliser, and its bullets say it chemically converts rust, so it sits with the converters. The description calls it a fast drying, milky white latex coating applied to rusted metal to stop rust, protect the surface and act as a primer for the finish coat. The spec table gives a dry time of 0.33 hours, about 20 minutes, and a full cure time of 24 hours. It holds 4.6 stars from 1,860 ratings, a global count.
It suits mild surface rust, the job the listing names. The honest catch: it comes in a single 237 ml size, and the listing names no application method.
Best gel for vertical surfaces: Hammerite Rust Remover Gel
Best gel for vertical surfaces: the Hammerite Rust Remover Gel, because the listing says its non drip formula suits vertical and intricate metal items, removes rust in 2 to 3 hours and will not damage paintwork.
Also great
Hammerite
Hammerite Rust Remover Gel
The Hammerite Rust Remover Gel listing says it removes rust in 2 to 3 hours, has a non drip formula ideal for vertical and intricate metal items and will not damage paintwork. It comes in a single 100 ml size, clear in colour. It is rated 4.1 from 3,358 ratings, a global count.
$21.97$25.16
Save 13%
Amazon.com.au price as of 02:04 am AEDT, subject to change
As an Amazon Associate, NestPath earns from qualifying purchases.
The Hammerite bullets say it removes rust in 2 to 3 hours, is ideal for removing rust from vertical and intricate metal items and will not damage paintwork, and the description calls the non drip formulation ideal for vertical surfaces. The spec table lists 100 ml, a clear colour and a weight of 100 g. It holds 4.1 stars from 3,358 ratings, a global count.
It suits vertical and intricate metal items, the uses the listing names. The honest catch: it comes in a single 100 ml size, and its 4.1 star rating is the lowest of the picks.
How to choose a rust converter or rust remover
Convert or remove: pick the job first
A rust converter leaves a surface ready for paint, and a rust remover takes the rust off. Five listings here say they convert rust: Rust-Oleum, Corroseal, WEICON, FORCH and Loctite. Evapo-Rust and Hammerite say they remove it.
Spray, brush, gel or soak
Rust-Oleum Reformer and WEICON come as spray cans. Corroseal goes on by brush, roller or spray, and the FORCH description names painting, spraying or a roller; our paint sprayer guide compares sprayers for bigger jobs. The Hammerite listing calls its non drip gel ideal for vertical surfaces, the Evapo-Rust Directions say to pour it into a container large enough that the item can be completely submerged, and the Loctite listing names no application method.
How long before you can paint
Two listings give a paint over time: FORCH Korroplex after 3 hours (its spec table's full cure row reads 1 hour) and Rust-Oleum Reformer after 24 hours. Corroseal and Loctite give dry times in their spec tables instead, 2 hours and about 20 minutes.
How much you need
FORCH and Corroseal give coverage in their bullets. FORCH says 1 litre covers up to 25 square metres, and Corroseal gives about 18.6 to 23.2 square metres per 3.78 litres, from a 946 ml size. Evapo-Rust says its reusable 3.78 litres removes rust from up to about 136 kg of steel.
Water based or oil based
Corroseal and Evapo-Rust are water based by their listings; Rust-Oleum Reformer is oil based.
Frequently asked questions
Will a rust converter stop rust?
The converter listings here say they protect against further rust. Rust-Oleum Reformer says it seals out moisture to prevent future rust, the Loctite description says it is applied to rusted metal to stop rust, WEICON says it helps protect against corrosion indoors and outdoors, and FORCH says Korroplex prevents flash corrosion.
Is a rust converter the same as a rust remover?
No. A rust converter turns rust into a surface ready for paint, while a rust remover takes the rust off. Rust-Oleum Reformer, Corroseal, WEICON, FORCH Korroplex and Loctite Extend say they convert rust. Evapo-Rust, a soak, and the Hammerite gel say they remove it; the Evapo-Rust Directions say the item can be painted once rust free.
What is the best rust dissolver on the market?
The pick here for taking rust off is Evapo-Rust The Original Rust Remover, a water based soak its listing says removes rust without scrubbing or sanding, though neither remover here calls itself a dissolver. For vertical and intricate metal items, the Hammerite Rust Remover Gel listing says its non drip gel removes rust in 2 to 3 hours.
What is the best rust converter for cars?
The Rust-Oleum Automotive Reformer Spray: its title names trailers, cars and trucks, and its listing says it bonds with rust and leaves a flat black surface ready for paint. The WEICON Rust Converter listing also names cars, along with machinery, plant and agricultural equipment, and Corroseal names automotive use beside marine, household and industrial applications.
Can rust converter be painted over?
Yes, the converter listings here say their surface takes paint, after different waits. Rust-Oleum Reformer is tack free in 20 to 40 minutes and fully paintable after 24 hours. FORCH Korroplex can be painted over after 3 hours, though its spec table's full cure row reads 1 hour. Loctite says its converted surface is ready to paint.
Is rust converter a primer?
Several are, by their listings. Corroseal converts rust and primes in one step with a latex metal primer, WEICON does rust and primer conversion in a single operation, and the Loctite description says it acts as a primer for the finish coat. Rust-Oleum Reformer leaves a paint ready surface, and FORCH calls Korroplex an adhesive enhancer for later paintwork.
How long does rust remover take to work?
The Hammerite Rust Remover Gel listing says it removes rust in 2 to 3 hours. The Evapo-Rust bullets say it removes rust in minutes, while its Directions say to soak the item for at least 30 minutes for light rust and 12 to 24 hours for stubborn rust.
Affiliate Disclosure: As an Amazon Associate, NestPath earns from qualifying purchases. This means if you click a product link and buy something, we may receive a small commission at no extra cost to you. We only recommend products we genuinely believe will help new homeowners. This does not influence our recommendations.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.