The Best Washing Machine Stands and Laundry Pedestals in Australia for 2026

If your front-loader dances across the laundry floor on the spin cycle, or you are tired of crouching to unload a machine that sits at ankle height, a washing machine stand is one of the cheapest fixes in the house. The VEVOR mobile base is the best washing machine stand in Australia for most laundries at $72.90, because it is rated to 540 kg, adjusts from 58 to 93 cm, and rolls out on eight wheels, four of which lock, so you can clean behind the machine and brake it back into place. In Australia the choice splits two ways. There are the heavy installed pedestals you see in appliance showrooms, which can run past four hundred dollars and are not sold on Amazon, and there are the adjustable, portable bases, laundry pedestals and stacking frames that Amazon Australia actually stocks for between forty-five and one hundred and seventy dollars. This guide is built around that second group, because it is what you can order tonight and assemble on the weekend without a tradie.

We researched every adjustable base, telescopic pedestal and stacking stand on Amazon Australia with a genuine local review history, then narrowed the field to seven that are sanely priced and backed by real ratings. Picks are re-checked against Amazon AU stock regularly, and any stand without a current price is flagged on its card. Whether you want to raise the door to a no-bend height, roll the machine out to sweep behind it, or stack a dryer on top, there is a pick here that fits.

What is the best washing machine stand in Australia right now?

For most laundries the VEVOR mobile base is the one to buy. It lifts the machine off a damp slab, rolls out on eight locking wheels so you can clean behind it, and brakes solid so the drum does not creep during the spin. If you want the proven value hero instead, the SPACECARE mobile base costs under fifty dollars and carries more owner ratings than any other stand on this list. And if you only need to lift a machine a few centimetres clear of a wet floor, the DAGUAI bracket is the cheapest option here.

• Best overall: VEVOR Fridge Stand Mobile Base, $72.90, the highest-rated pick at 4.6 out of 5.
• Best value: SPACECARE Adjustable Mobile Base, $48.58, with thousands of ratings.
• Cheapest: DAGUAI Adjustable Heightening Bracket, $45.21.
• Best for stacking a dryer: Dragon Li Freestanding Stand, $149.98.

How do the top washing machine stands compare?

Prices below are the Amazon Australia listings at the time of writing and can move with coupons and stock. Load figures are the maker's stated maximums. Use them as a guide and always leave a comfortable margin over your machine's actual weight.

Read the load column against the machine you own. A full domestic front-loader weighs roughly 60 to 90 kg dry, so even the 136 kg SPACECARE has margin, and the difference between 200 kg and 540 kg buys you a stiffer, quieter frame rather than a higher ceiling you will ever reach. The other number that matters is lift: a mobile base raises the door only a few centimetres, while the DAGUAI pedestal raises it about 24 to 27 cm, which is what brings a front-loader door up towards hip height and stops the stooping.

How did we choose these washing machine stands?

NestPath does not run a testing lab, and we will never pretend to. What we do is study the market the way a careful buyer would if they had a spare weekend and access to every listing at once. We started with the search results Australians actually see for washing machine stands, bases and pedestals, then screened each candidate against a short set of rules.

First, it had to be genuinely in stock on Amazon Australia, not a listing showing a future restock date. Several popular stands were dropped for exactly that reason. Second, it needed a real star rating and at least a handful of verified reviews, so we could read what owners say after a few spin cycles rather than on unboxing day. Third, the price had to make sense for the category. Where a listing showed a figure more than double the going rate for a similar stand, we treated it as a reseller artefact and left it out. Finally, we read the one-star and two-star reviews as closely as the five-star ones, because a laundry stand lives or dies on stability, and the honest complaints tell you where the limits are.

The result is seven stands that a first-home buyer can order with confidence, spanning a simple lift-off-the-floor bracket to a full stacking stand for a washer and dryer. The specification list we work from for every pick is the stated load rating in kilograms, the adjustable range in centimetres, the footprint, the wheel and brake type, and the current Amazon Australia price and stock at the last refresh. The last verified date sits at the top of this page.

Which washing machine stand is best for most laundries? VEVOR Fridge Stand Mobile Base

The VEVOR Fridge Stand Mobile Base is our best overall pick, and it is the highest-rated stand in this guide at 4.6 out of 5. It is a telescopic steel frame that sits under the machine on eight twin wheels, four of which lock, so you can roll a heavy front-loader straight out to mop behind it and then brake it back into place. The frame adjusts from 58 to 93 cm, which covers almost any washer, dryer or fridge footprint, and the maker rates it to 540 kg, comfortably beyond what a domestic washing machine will ever weigh.

What makes it the sensible default is that it solves three problems at once. It gets the machine off a floor that gets damp in a Queenslander laundry or an apartment European-laundry cupboard. It lets you clean a spot that otherwise never gets cleaned. And the locking wheels plus reinforced anti-slip feet keep the machine from walking during a fast spin, which is the single most common laundry complaint. Assembly is a tool-free push-fit of the steel tubes, and owners consistently describe it as a five-minute job.

At $72.90 it costs more than a bare bracket but far less than an installed showroom pedestal, and you get the mobility that fixed pedestals cannot offer. For a rented unit or a first home where you may reconfigure the laundry later, that flexibility is worth a lot.

Flaws but not dealbreakers

The wheels raise the machine only a little, so this is about mobility and floor protection rather than lifting the door to waist height. If your goal is purely to stop bending, look at the taller stands further down. A couple of owners also note that on a very uneven floor you should engage all four brakes and check the feet are all bearing weight before you trust it.

What is the best value washing machine base? SPACECARE Adjustable Mobile Base

The SPACECARE Adjustable Mobile Base is the value champion here, and it is the most-reviewed stand in this guide by a wide margin, with thousands of ratings and a 4.5 average. It is a wheeled base that extends from 47 to 68.5 cm to sit under a washer, dryer or fridge, rolls out on four locking swivel wheels for cleaning, and carries a stated 136 kg. At $48.58 it is the stand most Australians end up buying, and the review volume tells you why.

The clever touch is the pairing of four locking swivel wheels with four PVC anti-vibration pads. The wheels let you roll a heavy machine straight out to clean behind it and then brake it firmly back in place, while the pads soak up the shudder that makes a spin cycle rattle. Owners repeatedly call it sturdy, simple and much cheaper than the alternatives, and note that it lifts the machine just enough to clean underneath and to keep it clear of a wet floor.

It does the same roll-out job as the pricier VEVOR on a lighter 136 kg frame with four wheels rather than eight. For a domestic washer that is plenty, and it is the reason this base, not the dearer one, is what most buyers reach for. If you want the proven, low-fuss value option, this is the one to start with.

Flaws but not dealbreakers

A base like this dampens movement, it does not eliminate it. The handful of unhappy reviews come from people expecting it to cure a badly unbalanced or very aggressive machine, which no simple base can do. Take the time to level it properly on installation, keep the load balanced, and it does its job. It also ships flat-packed and needs assembling, though owners describe that as straightforward.

What is the cheapest way to raise a washing machine? DAGUAI Adjustable Heightening Bracket

The DAGUAI Adjustable Heightening Bracket is the cheapest stand in this guide at $45.21, and it is a no-nonsense way to lift a machine about 24 to 27 cm off the floor. It is a stainless steel frame with adjustable width to fit different appliance footprints, and the four-leg configuration is rated to 200 kg, with eight and twelve-leg setups available for heavier loads. It holds a 3.7 average across 119 ratings, which is the lowest score of our picks but still solidly positive for a budget item.

Where this bracket earns its place is the combination of price and lift. It raises the machine noticeably higher than a simple base, which brings the door up closer to a comfortable height and gets the appliance well clear of a floor that might flood or stay damp. Owners using it under a dryer are the happiest, since a dryer puts far less side-to-side force on the frame than a spinning washer, and several call it a great space-saver that is easy to assemble.

Treat it as the entry point. If your budget is tight and your main aim is to get the machine off the ground and reduce bending, it is hard to beat on price.

Flaws but not dealbreakers

The honest reviews are clear that this is the least rigid pick, and a heavy washer on a fast spin can flex the legs if it is not perfectly level and loaded evenly. Buy it for a dryer or a lighter machine, sit it dead flat, and keep the load balanced. If you own a large, aggressive front-loader, step up to the heavier-duty wheeled VEVOR instead.

What if you want to stack a dryer above the washer? Dragon Li Freestanding Stand

The Dragon Li Freestanding Stand is the pick when floor space is tight and you want a dryer sitting above the washing machine rather than beside it. It is a 94 cm tall carbon-steel frame, 70 cm wide and 60 cm deep, built from 25 mm square tube, with adjustable feet for uneven floors and a stated 200 kg capacity. At $149.98 it is a mid-priced way to turn one appliance footprint into two.

The washer slides into the bottom bay and a portable or smaller dryer sits on the top plate, which frees up a whole run of laundry floor. Owners in apartments and units call it a genuine space-saver that is easy to assemble, and several note it barely moves once loaded. For a compact laundry where you were going to buy a separate stacking kit anyway, this does the job in one purchase. A stacking kit is only worth buying once you know the dryer will physically sit inside the stated top dimensions.

Because it is taller and holds two appliances, stability matters more than with a low base. The best results come from bolting the upper frame to the wall, which several owners recommend, and from checking every foot is bearing weight before you load it.

Flaws but not dealbreakers

Wobble is the recurring theme in the critical reviews. On a heavy load, an unbraced tall stand can rock, so wall-fixing it is not optional if you want it rock-steady. Check that your dryer fits within the stated top dimensions before ordering, and do not exceed the load rating by stacking a full-size vented dryer where a compact one belongs.

Which over-washer shelf saves the most floor space? MAKTOR Over-Washer and Dryer Shelf

The MAKTOR Over-Washer and Dryer Shelf is a freestanding stacking rack that stands over the top of a front-loader, giving you a shelf for a dryer, a basket or laundry supplies without touching the machine underneath. It is a painted steel frame, 105 cm tall, built from 4 cm square tube, with three height positions that each adjust in 5 cm steps and a stated capacity of up to 350 kg. It holds a solid 4.4 average at $135.98.

The appeal is that the washing machine sits free underneath, so you are not lifting or levelling it at all. You keep the machine on the floor and build storage upward, which suits a laundry where you want a bench-height surface or a home for the dryer without a permanent install. Owners describe it as sturdy and a real space-saver, and the height adjustment means you can size the gap to your specific machine.

It is the most flexible of the vertical options because nothing bolts to the appliance. That makes it a good renter-friendly choice as well.

Flaws but not dealbreakers

One detailed reviewer measured the wall thickness as thinner than advertised and suggested extra bracing before trusting a full dryer on top, and another found it tall for their space. Measure your ceiling clearance and your machine height first, and if you are loading a heavy dryer up top, add wall fixings for peace of mind. As a shelf over the washer with lighter items it is very well liked.

Is there a heavy-duty Australian-brand base with wheels? Tooleroo Adjustable Wheeled Base

The Tooleroo Adjustable Wheeled Base is the local option, from an Australian brand, and it pairs a telescopic steel frame with four locking swivel wheels and eight support legs. It adjusts from 72.5 to 90 cm long and 57.5 to 76 cm wide, carries a stated 300 kg, and adds an integrated spirit level, scale markings and a buckle-lock system for accurate alignment. It is $89.99 and holds a 4.3 average, though from just three reviews so far.

It reads like a heavier-duty cousin of the VEVOR base, aimed at people who want an Australian-branded product with wheels for cleaning access and a stated capacity to spare. Owners praise it as stable and heavy-duty, and note the lockable wheels make shifting a full-size machine easy. The stainless steel tubes and thickened polypropylene panels are built to shrug off a damp laundry.

If buying from a local brand matters to you, or you want a wheeled base with a generous size range and built-in levelling aids, this is the one to look at.

Flaws but not dealbreakers

The review count is still small, so there is less long-term feedback than for the SPACECARE or VEVOR. One owner also found that for a narrow front-loader the steel rods did not retract far enough and needed trimming with an angle grinder, so check the minimum dimensions against your machine before you buy. For standard and larger machines the size range is a strength.

What about the tall stacking stand everyone sees online? Valdera Over Stand

The Valdera Over Stand is the priciest pick in this guide at $169.99, and it is the full washer-and-dryer stacking kit you see all over social media: the washing machine goes in the lower bay and the dryer sits on the top shelf, all in one steel frame rated to a stated 350 kg. It holds a 4.3 average across ten reviews, and listings often carry a small coupon that trims the price.

It competes directly with the Dragon Li stand, with a higher stated capacity and a slightly higher price. Owners like the black finish, call it sturdy and practical, and single out the weight capacity for the money. If you have committed to stacking and want the heaviest-rated frame here, it is a reasonable buy.

As with any tall stacking stand, the physics are the same: two appliances up high need bracing. Treat the load rating as a ceiling, not a target, and expect to wall-fix it for full stability.

Flaws but not dealbreakers

The split in the reviews is telling. Owners who use it as a base for a dryer or as storage over the washer are happy, while the unhappy ones loaded a dryer on top and found it needed more cross-bracing to feel solid. If you go this route, fix it to the wall and keep the heavier appliance on the bottom.

Where can you buy a washing machine stand in Australia?

Every pick on this page is an Amazon Australia listing, because that is the only shop that carries the full spread of adjustable bases, laundry pedestals and stacking frames side by side. It is not the only place to look.

Bunnings does sell a heavy-duty option: the Britec washer base is the one people mean when they ask, and it is a fixed-height base rather than a wheeled one. We are not quoting a price for it, because we do not hold a live listing for it and the shelf price moves. What we can say is how to compare it: check its stated load rating against the 200 kg to 540 kg range in the table above, and check whether it has locking wheels, which is what lets you roll a machine out and clean behind it.

Harvey Norman and the appliance showrooms sell the installed pedestals with a drawer, which are the best-looking and by far the most expensive option, and they are usually brand-matched to the machine. eBay Australia carries most of the same adjustable frames as Amazon, often from the same sellers. Whichever shop you use, the three numbers to compare are the stated load, the adjustable range against your own machine footprint, and the lift in centimetres.

What should you look for in a washing machine stand?

A few things separate a stand that quietens your laundry from one that rattles louder than the machine. Work through these before you buy.

• Match the load rating to reality, with margin. The load rating only matters against the weight of the washing machine you are putting on it, and a full front-loader weighs roughly 60 to 90 kg dry. Every stand here is rated well above that, but a bigger margin means a stiffer, quieter frame, so do not shop on capacity alone.
• Check the size range against your machine. Measure your appliance footprint and confirm it falls inside the stand's minimum and maximum. The most common regret is a base that does not retract small enough for a slim machine.
• Decide if you need wheels. Locking wheels let you roll the machine out to clean and are brilliant in tight spaces, but they lift the door less. Fixed bases sit lower and cost less.
• Look for built-in levelling. Bubble levels and adjustable feet make it far easier to sit the machine dead flat, which is the biggest factor in stopping vibration.
• Think about height and bending. If your main aim is to stop stooping, a taller bracket or a stacking stand raises the door more than a low base does.
• Plan to wall-fix tall stands. Any stand holding two appliances up high should be anchored to the wall. Factor that into where you place it.

How do you keep a washing machine stand stable and lasting?

A stand is only as good as its setup, and a little care keeps it quiet for years.

• Level it on day one. Sit the empty machine on the stand, then adjust the feet until a spirit level reads flat in both directions. Recheck after the first full spin cycle.
• Balance every load. A single heavy item like a doona throws the drum off balance and makes any stand shudder. Spread the load and the vibration drops, and remember that overloading and the wrong dose of laundry detergent are the two things that make a machine walk, whatever it is standing on.
• Engage the brakes. On a wheeled base, lock all the wheels before you run a cycle so the machine cannot creep.
• Wipe down and check the floor. Lift or roll the machine out every few months to dry any moisture and check for rust on the feet, which is where damp laundries do their damage.
• Retighten the fixings. After a few weeks of cycles, run a spanner over the bolts. Flat-packed steel frames loosen slightly as they settle, and a quick tighten restores the rigidity.
• Add anti-vibration pads if needed. On tile or timber, a set of rubber feet pads under the stand adds grip and soaks up noise for a few dollars.

What else do you need for a new laundry setup?

A stand is one piece of a well-organised laundry. These extras are worth adding to the same order.

• Anti-vibration rubber feet pads to add grip and cut noise under the stand or the machine.
• A front-load washer drain pan to catch a leak before it reaches the floor, useful on timber or upstairs.
• An appliance moving dolly for shifting the machine in and out during install or a clean.
• A set of extendable appliance rollers if you would rather add wheels to a fixed base than buy a wheeled one.
• Laundry detergent capsules to stock the shelf you just freed up.

Which washing machine stands did not make the cut?

Plenty of stands show up in the search results that we chose to leave out, and it is worth knowing why. The heavy installed pedestals from specialist brands, the sort trusted by tens of thousands of Australian homes, are genuinely excellent, but they are not sold through Amazon and often run past four hundred dollars, so they sit outside the scope of this guide. The prior season's popular runner-up was dropped because its listing moved to a future restock date, and we only recommend stands you can order today. We also passed on several near-identical mobile bases priced far above the going rate, which is usually a sign of a third-party reseller rather than a better product. If your heart is set on a fixed cabinet-style pedestal with a drawer, those exist on Amazon Australia too, but the reviews on the budget versions are mixed on the drawer fit, so we kept our picks to the frames that owners rate most consistently.

Washing machine stand FAQ

Do washing machine stands stop the machine from moving?

A good stand greatly reduces movement but does not replace correct installation. The stand must be levelled so the machine sits flat, and loads must be reasonably balanced. Wheeled bases with locking brakes and bases with anti-slip feet are the most effective at stopping a machine walking during the spin cycle.

How much weight can these stands hold?

The stands in this guide carry stated maximums from 200 kg up to 540 kg. A full domestic front-loader weighs roughly 60 to 90 kg, so all of them have ample margin. Always leave a comfortable buffer over your machine's actual weight rather than buying right at the limit.

Will a stand raise my machine enough to stop the bending?

It depends on the type. Low bases lift the machine only a little and are mainly about floor protection and cleaning access. Taller brackets raise the door more, and stacking stands raise a top appliance to bench height or above. If reducing bending is your priority, choose a taller bracket or a stacking stand.

Can I put a stand under a top-loader?

Most adjustable bases are designed with front-loaders in mind, since raising the door is the main benefit there. A base can sit under a top-loader for floor clearance and cleaning access, but check the load rating and footprint carefully, as top-loaders are often heavier and taller, which makes stability more important.

Do I need to bolt the stand to the floor?

Low bases and wheeled frames do not need bolting down, just correct levelling and, on wheels, engaged brakes. Tall stacking stands that hold two appliances are a different matter and should be anchored to the wall for full stability, which several owners of the taller picks recommend.

Does a washing machine need a stand?

No. A washing machine works perfectly well on a level floor, and most Australian laundries never use one. A stand pays for itself in three situations: when the floor gets damp, as it does in a slab laundry or an apartment cupboard; when you cannot clean behind the machine and want it on locking wheels; and when you are tired of stooping to a door that sits at ankle height. If none of those describes your laundry, save the money.

Is a washing machine stand good or bad?

It is good if you match the type to the problem and level it properly, and bad if you buy the wrong one. The upside is ergonomics, floor protection, airflow underneath and, on a wheeled base, cleaning access. The downside is that every centimetre you raise a machine also raises its centre of gravity, so a tall stand under a heavy front-loader amplifies any wobble the spin cycle creates. That is why the tall stacking frames on this page should be wall-fixed and the low bases do not need to be.

Does Bunnings sell heavy-duty washing machine stands?

Yes. The Britec washer base is the Bunnings option people usually mean, and it is a fixed base rather than a wheeled one, so it does not roll out for cleaning. We hold no live listing for it, so there is no price here for it, and the comparison to make is on the numbers rather than the shop: the picks on this page carry stated loads from 200 kg to 540 kg, and the wheeled bases add the ability to roll a full-size machine straight out and brake it back into place.

How do you install a washing machine stand?

Four steps, and the order matters. Assemble the frame on the floor and set the width to your machine footprint before the machine goes anywhere near it. Walk or dolly the machine on, keeping it centred so the weight sits over the legs rather than the ends of the rails. Adjust the feet until a spirit level reads flat both ways, front to back and side to side. Then run one empty spin cycle, watch for creep, and recheck the level and the bolts afterwards, because a flat-packed steel frame settles in the first few weeks.

Where does a washing machine stand fit in your laundry plan?

A stand is a small buy that makes the rest of your laundry work better, so it pays to plan the whole space at once. If you are still choosing the machine itself, or working out how to lay out a compact laundry, these guides go deeper on the pieces around the stand.

• How to set up a laundry from scratch
• The best washing machines in Australia
• The best clothes dryers in Australia
• The best clothes airers in Australia
• The best laundry baskets in Australia
• The best heated clothes airers in Australia

About the author

Anish Puri founded NestPath in 2026 after going through the Australian first-home-buyer process himself. NestPath focuses on Australian first-home buyers because the existing review sites are American, generic, or both. Anish handles editorial selection across the homeowner hub. Reach out: hello@nestpath.com.au