The Best TV Wall Mounts in Australia for 2026

Which TV wall mount should you actually buy in Australia?

If you want the short answer: most people buying a 55 to 86 inch TV should get the Perlegear Full Motion TV Wall Mount. It holds up to 60kg, swivels to kill window glare, and it is one of the few full motion brackets that openly ships an extension kit for the wider stud spacing common in Australian homes. If you only ever push your TV flat against the wall, you can save a lot of money with a fixed or tilt bracket instead.

That last point is the one nobody tells first home buyers. A TV mount is not really a TV product, it is a wall product. The thing that decides whether your install is a 20 minute job or a weekend of patching plaster is your wall: timber stud, steel stud, brick or double brick. Get that right and almost any well rated bracket will do. Get it wrong and even an expensive mount will sag, lean or pull out. So this guide is built around the three things that actually matter in an Aussie home: your TV weight, your VESA hole pattern, and your stud spacing.

We researched the brackets that are genuinely in stock on Amazon Australia, carry real local star ratings, and suit the TVs Australians actually own. Below you will find eight picks across fixed, tilt and full motion, from a budget fixed mount around $33 up to a heavy duty articulating arm, plus a plain English buying and install section so you do not have to learn this twice.

TL;DR: our quick picks for 2026

Last updated June 2026. Prices move on Amazon, so treat these as a guide and check the live listing before you buy.

• Best overall (big TVs): Perlegear Full Motion, 42 to 86 inch, up to 60kg, swivel and tilt, around $89.99.
• Best value: Mounting Dream Tilt, 37 to 75 inch, up to 60kg, slim tilt, around $59.99.
• Best budget: Amazon Basics Low Profile fixed, 32 to 86 inch, from around $32.60.
• Best for fireplaces and wide studs: Mounting Dream Fixed extra wide rail, 42 to 90 inch.
• Best heavy duty full motion: Mounting Dream Full Motion, 42 to 84 inch, our highest rated pick.
• Best for small and bedroom TVs: MOUNTUP Full Motion, 14 to 42 inch.
• Best for corners and long reach: ELIVED Long Arm, 26 to 65 inch, extends 37.4 inches.
• Also worth a look: Amazon Basics Full Motion, 22 to 55 inch, the most reviewed mount in this guide.

How do these TV wall mounts compare at a glance?

The picks below run from the simplest fixed plates to full motion arms. As a rule, the more a mount moves, the more it costs and the further your TV sits from the wall when retracted. Fixed mounts sit flush and cost the least. Tilt mounts add a small downward angle to fight glare from a high position. Full motion arms swing out, swivel and tilt, which is what you want above a fireplace, in a corner, or in any room where you sit off to one side. Match the movement to how you actually watch, not to the biggest spec sheet.

How did we evaluate these TV wall mounts?

NestPath is an Australian first home buyer site, so our job is to cut through American review lists and surface the brackets that suit Aussie walls and are genuinely available here. We research and study the market, we do not run a physical lab. Here is what shaped these picks.

• Real Australian availability: every pick was checked as in stock on Amazon Australia, in Australian dollars, at the time of writing.
• Genuine local ratings: we only included mounts carrying real star ratings and verified review counts, then read the Australian reviews to find recurring complaints, not just the praise.
• VESA and weight fit: we recorded the supported screen sizes, VESA hole range and maximum load for each mount so you can match it to your exact TV.
• Stud spacing for Aussie walls: we paid attention to whether a mount fits the wider stud spacing common in Australian framing, and whether it spans two studs or one.
• Movement versus value: we weighed how much articulation each mount offers against its price, so the right pick depends on your room rather than the dearest option winning by default.

Best TV wall mount for big TVs: Perlegear Full Motion

The Perlegear Full Motion TV Wall Mount is our top pick for anyone hanging a 55, 65, 75 or larger screen and wanting to swivel it. It fits most 42 to 86 inch flat or curved TVs, carries up to 60kg, and uses heavy duty steel arms that extend about 42cm out from the wall then retract to roughly 7cm for a low profile look. It tilts 5 degrees up and 15 degrees down with no tools, swivels 45 degrees either way, and offers 3 degrees of post install leveling so you can straighten the screen after the bolts are in. With a 4.7 star rating across more than 5,000 ratings, it is one of the most trusted big TV arms on Amazon Australia.

What earns it the top spot for Australian homes is the stud honesty. The listing states it suits 12 inch and 16 inch wood studs, concrete or brick, and Perlegear will send an extension bracket for stud spacing up to 24 inches if you ask. That matters here, because Australian framing is often spaced wider than the US default, and a lot of cheaper arms quietly assume a narrow single stud. The wide wall plate has cutouts so you can keep an existing power point behind the TV, and the swivel is the feature you will use daily if your lounge has a window that throws afternoon glare.

It is the most capable everyday mount here for the money. If your TV is 50 inches or larger and you want the freedom to angle it, this is the one to beat.

Flaws but not dealbreakers

Full motion arms always sit further off the wall than a fixed plate, so if you crave that flush, picture frame look, a fixed mount suits better. Like nearly every mount in this class, it is rated for timber studs, brick or concrete and not for plasterboard alone, so a stud wall with metal studs will need the right anchors. And at over 5kg in the box it is a two hands job to lift onto the wall plate, so grab a helper for the lift.

Best value TV wall mount: Mounting Dream Tilt

The Mounting Dream Tilt TV Wall Mount (model MD2268-LK-04) is the pick when you want a tidy, low profile install for a large TV without paying full motion prices. It fits most 37 to 75 inch TVs up to 60kg, with VESA patterns from 200x100mm up to 600x400mm, and it sits just 1.5 inches off the wall. The tilt goes up to 8 degrees, which is exactly what you need when the TV is mounted a little high and you want to angle the picture down toward the couch. At a 4.7 star rating across more than 400 ratings, it is a proven, no drama bracket.

Australian reviewers repeatedly call out how complete the box is: M6 and M8 TV screws, spacers, a bubble level and a clear three step manual, with the brand noting AU based support and a long warranty. The spring loaded safety clips at the bottom make hanging a heavy panel on your own far less nerve wracking than fiddly bolts. One reviewer mounted a 65 inch Hisense solo and called it a 15 minute job. For a tilt mount that handles screens right up to 75 inches, the value here is hard to fault.

Tilt is the sweet spot for most lounge and bedroom setups. You almost never need to swing a TV out from a flat wall, but you very often want to drop the angle a few degrees, and this does that cleanly while keeping the screen close to the wall.

Flaws but not dealbreakers

It is timber stud, brick or concrete only, not plasterboard alone, and concrete anchors are supplied on request rather than in the box, so plan your wall type first. One Australian reviewer mounting into gyprock with metal studs had to buy their own toggle bolts. The 8 degree tilt is also fixed in range, so if you need to swivel toward a side seat, step up to a full motion arm instead.

Best budget TV wall mount: Amazon Basics Low Profile

The Amazon Basics Low Profile TV Wall Mount is the budget pick, and it is genuinely good rather than just cheap. It is a fixed mount for 32 to 86 inch TVs up to 68kg, with VESA support from 200x100mm to 600x400mm, sitting just over 3cm off the wall. It carries a 4.7 star rating across more than 2,000 ratings and starts around $32.60, which is a fraction of what the major retailers charge for an equivalent bracket. This is the most reviewed budget fixed mount in our lineup.

The appeal is simple. If your TV is going on one wall and staying there, you do not need moving parts, and paying for them is wasted money. This plate gives you a flush, tidy result with a horizontal post install leveling feature so you can nudge the screen straight after it is up. It comes as two pieces you assemble with four screws, includes a mounting template, wall plugs and a full hardware spread, and Australian buyers regularly note it does the same job as a mount three times the price at JB Hi-Fi.

For a spare room, a bedroom, a rental, or any lounge where the TV simply needs to sit flat and central, this is all the mount most people will ever need.

Flaws but not dealbreakers

Because it is fixed, there is no tilt or swivel, so plan your viewing height carefully before you drill. A couple of reviewers noted the post install leveling screws were not as obvious as the manual suggested, and the supplied TV screws did not fit every Samsung panel, so check your VESA bolt size. With a fixed mount you also lose easy access to the rear ports, so route your cables before the TV goes on.

Best TV wall mount for fireplaces and wide studs: Mounting Dream Fixed extra wide

The Mounting Dream Fixed TV Wall Mount (model MD2361-32-04) earns its place for one specific Australian headache: mounting a big TV over a fireplace or across studs that sit far apart. Its wall plate is a full 32 inches wide, so it spans 16, 18, 24 and even 32 inch stud spacing, and it fits most 42 to 90 inch TVs up to a stated 132 lbs with VESA up to 800x400mm. It holds the TV just 1.1 inches from the wall for a flush look, and carries a 4.6 star rating.

The extra wide rail is the whole point. With most mounts, you are locked into wherever a single stud happens to fall, which is rarely above the centre of a fireplace. A long rail lets you slide the TV bracket left or right to centre the screen while still biting into solid timber on both sides. Australian reviewers with 65 inch Sony and LG OLED panels report a rock solid result, including on solid brick, and praise the included spirit level and generous hardware. One noted the headroom to upgrade to a 90 inch set later without changing the mount.

If your dream wall is a feature wall or a chimney breast, this is the bracket that makes centring the TV possible rather than a compromise.

Flaws but not dealbreakers

Because it ships as two plates, one Australian reviewer flagged that the design assumes wider spacing and will not span studs as close as 450mm, so measure your studs before buying. It is fixed only, with no tilt, which can be an issue above a hot fireplace where you may want to angle the screen down. And it is not for plasterboard alone, so brick or solid studs are a must for a TV this size.

Best heavy duty full motion mount: Mounting Dream Full Motion

The Mounting Dream Full Motion TV Wall Mount (model MD2617-24K-04) is the highest rated mount in this entire guide at 4.8 stars, and it is the one to choose if you want full articulation built like a tank. It fits most 42 to 84 inch TVs up to 100 lbs, with max VESA 600x400mm and support for stud spacing up to 24 inches. The dual arm design tilts 5 degrees up and 15 degrees down, swivels 45 degrees each way, and extends from 3 inches out to nearly 17 inches, with 4 degrees of post install leveling.

This is the mount for the tricky room: the corner lounge, the open plan space where you watch from the kitchen, or the bedroom where you want to angle the TV toward the bed. Built from aluminium and steel with six articulating arms, it arrives mostly pre assembled for a quick three step install, and the AU based support and long warranty are reassuring on a part that is literally holding your most expensive screen. Australian owners with 55 and 75 inch TVs describe it as sturdy with no wobble or droop, which is the highest praise an arm can earn.

If the Perlegear is sold out or you simply want the best reviewed articulating arm on the list, this is a direct, slightly heavier duty alternative.

Flaws but not dealbreakers

One Australian reviewer wished plastic anchors for brick walls were included rather than supplied on request, so factor in a quick hardware run if you are on brick. The tilt nuts also need to be done up firmly or the screen can flop forward under its own weight, a two minute fix during install. And like all long arms, it sits well off the wall when extended, so it is overkill if your TV never leaves a flat wall.

Best mount for small and bedroom TVs: MOUNTUP Full Motion

The MOUNTUP Full Motion TV Wall Mount is the pick for smaller screens, the 14 to 42 inch TVs and monitors that end up in bedrooms, kitchens, studies and kids rooms. It carries a huge 4.7 star rating across more than 6,700 ratings, supports VESA from 75x75mm to 200x200mm and loads up to 44 lbs, and it does everything: tilt, swivel and a full 180 degree rotation between landscape and portrait. It extends about 14.8 inches and tucks back to 2.7 inches when you are done.

Small TVs are exactly where full motion earns its keep, because these screens go in tight spots where you watch from an angle: the corner of a kitchen bench, the foot of a bed, a desk. The single stud design suits narrow walls and corners, and Australian reviewers single out the instruction manual as unusually clear, with one calling it a masterpiece. The arms ship stiff on purpose to stop sag, and a quick squirt of lubricant or a turn of the supplied Allen key loosens them to taste.

For a second TV that needs to swing and tilt without dominating the room, this is a tidy, well priced choice.

Flaws but not dealbreakers

The 44 lbs and 42 inch ceiling means it is strictly for smaller screens, so do not push a 50 inch panel onto it. A few buyers found the supplied screws did not fit their particular TV, which is normal across all brands, so check your VESA bolt size first. And the arms genuinely are very tight out of the box, which is by design rather than a fault.

Best mount for corners and long reach: ELIVED Long Arm

The ELIVED Long Arm TV Wall Mount is the specialist pick for corners and awkward layouts, and it is the most reviewed mount of its type here, with a 4.7 star rating across more than 22,000 ratings. It fits most 26 to 65 inch TVs up to 35kg, supports VESA from 100x100mm to 400x400mm, and its headline trick is reach: it extends a remarkable 37.4 inches from the wall, then retracts to 3 inches for a flush look. It swivels 90 degrees either way and tilts up to 20 degrees.

That long extension is what makes it brilliant in a corner. A standard arm cannot pull a TV far enough out of a corner to face the room, but this one can reach right out and swing the screen toward your seating. It is a single stud design, which is ideal for corner mounting where you only have one stud to work with, and it includes a bubble level and the standard hardware kit. Reviewers worldwide use it to pull TVs out of dead corners and around room dividers.

If your only viable wall is a corner, or you want to watch from the kitchen and the lounge off the one screen, the reach here solves a problem most mounts simply cannot.

Flaws but not dealbreakers

A long arm puts a lot of leverage on the wall, so a solid single stud, brick or concrete fixing is essential and plasterboard alone will not do. As ELIVED notes, the mounting plate is offset, so the screen shifts sideways as you extend the arm, which means a quick test fit before final drilling is wise. Concrete anchors are sent on request rather than included, so ask if you are on brick.

Also worth a look: Amazon Basics Full Motion

The Amazon Basics Full Motion Articulating TV Wall Mount is the most reviewed mount in this entire guide, with a 4.6 star rating across more than 63,000 ratings, which makes it one of the most battle tested brackets you can buy anywhere. It fits most 22 to 55 inch TVs up to 80 lbs, supports VESA from 100x100mm to 400x400mm with no adaptors needed for common patterns, and offers 15 degrees of tilt, up to 180 degrees of swivel and around 16 inches of extension on a single stud install.

It lands in the competition slot rather than a category win only because its 55 inch and 80 lbs ceiling sits below our big TV picks, not because of any weakness. For a mid size lounge or bedroom TV up to 55 inches, it is a genuinely excellent full motion mount at a sharp price, and the sheer volume of positive Australian reviews speaks to how forgiving and complete it is. Buyers consistently note it does the same job as a bracket three times the price at the big retailers, with a hardware bag that covers almost any TV.

If your TV is 55 inches or smaller and you want a proven, low cost articulating arm, this is a safe, sensible buy.

Flaws but not dealbreakers

The 55 inch and 80 lbs limit rules it out for the big 65 and 75 inch panels many buyers now own, so size check first. It is a single stud full motion design, so the wall fixing has to be spot on into solid timber, brick or concrete. And as with every mount here, you should confirm your TV bolt size against the supplied hardware before you start.

What should you look for in a TV wall mount?

Four things decide whether a mount works for you, and none of them are the brand name. Get these right and the install is easy.

What is VESA and how do I find mine?

VESA is just the distance between the four mounting holes on the back of your TV, measured in millimetres, horizontal by vertical. A 400x300mm VESA means the holes are 400mm apart across and 300mm apart down. Every mount lists a VESA range, and your TV needs to fall inside it. To find yours, measure the holes yourself or check your TV manual. Most 55 to 75 inch TVs are 400x400mm or 600x400mm, while small 32 inch sets are often 200x200mm or 100x100mm.

How much weight does my mount need to hold?

Check your TV weight in its manual or specs, then pick a mount rated comfortably above it. A modern 65 inch TV is often 20 to 30kg, but mounts state their limit in pounds or kilograms, so convert if needed: 132 lbs is about 60kg. Never run a mount near its ceiling, especially a full motion arm, where the extended weight puts far more leverage on the wall.

Fixed, tilt or full motion: which do I need?

Fixed sits flush and costs least, ideal when the TV is at eye level and stays put. Tilt adds a downward angle, perfect when the TV is mounted high, such as above a console or fireplace. Full motion swings out, swivels and tilts, which you want for corners, side seating, open plan rooms, or any wall where you need to reach the ports behind the TV.

Why does Australian stud spacing matter?

This is the Aussie specific catch. Australian timber framing is frequently spaced at 450mm or 600mm centres, which is wider than the US 16 inch default many imported mounts assume. A single stud mount sidesteps this, but a two plate mount needs to span studs at your spacing. If you are on brick or double brick, which is common here, you fix into the masonry with the right anchors instead, and stud spacing stops mattering. Always locate your studs with a stud finder before you commit to a position.

How do you install and maintain a TV wall mount?

Answer first: most mounts are a one person or two person job of well under an hour, and the secret is hitting solid structure and getting it level. Here is the short version.

• Find your structure. Use a stud finder for timber or steel framing, or treat brick and concrete as your fixing point. Never hang a TV on plasterboard alone, no mount here is rated for it.
• Use the template and level. Most of these mounts include a paper drilling template and a bubble level. Tape the template over the stud, mark your holes, and check level twice before you drill once.
• Match your anchors to your wall. Timber studs take lag bolts, brick and concrete need the correct masonry anchors. Several brands supply concrete anchors on request rather than in the box, so order them ahead if you are on brick.
• Plan your cables before the TV goes on. With fixed and tilt mounts the rear ports get hard to reach once the TV is up, so connect and route your cables first. A cable management tray or in wall conduit gives the cleanest finish.
• Maintenance is minimal. Every few months, check the wall bolts and the TV bracket bolts are still firm, and on full motion arms tighten the tilt tension if the screen starts to droop. That is genuinely it.

You will also want these to finish the job

A mount gets the TV on the wall, but a few small extras turn a good install into a clean one. These pair naturally with any pick above.

• A stud finder and a spirit level if your mount does not include one, so you drill into solid timber and hang the screen dead straight.
• Masonry anchors and a masonry drill bit for brick or double brick walls, since many mounts only supply timber stud hardware in the box.
• A cable management tray or in wall conduit to hide the power and HDMI runs for that floating, wireless look.
• A soundbar mounted just beneath the TV, since wall mounting frees up the console space a soundbar wants.
• A smart plug behind the unit so you can cut standby power to the whole setup with one tap.
• HDMI cables of the right length measured for the wall run, because the cables in the TV box are rarely long enough once everything is hidden.
• An HDMI extension or recessed wall plate for a fully flush finish if you are running cables inside the wall.

What about the rest of the market?

Plenty of mounts sell well at JB Hi-Fi, The Good Guys, Bunnings and Harvey Norman from brands like Vogel's, One For All, Sanus, EzyMount, Crest and the retailers' own labels such as XCD and Linden. Many are excellent, and a Sanus or Vogel's bracket is a fine buy if you prefer to shop in store and pay a premium for the name. We have focused this guide on mounts that are in stock on Amazon Australia with strong, verifiable local ratings, which is where the value tends to sit for first home buyers watching the budget. The retailer brackets at two or three times the price rarely do anything the picks above cannot, provided you match VESA, weight and stud spacing correctly.

Frequently asked questions

What is the best type of TV wall mount?

It depends on your room. Fixed mounts are best when the TV sits at eye level and stays put, tilt mounts suit a TV mounted high above a console or fireplace, and full motion arms are best for corners, side seating and open plan spaces where you watch from different angles. For most large lounge TVs, a full motion or tilt mount gives the most flexibility.

Can I mount a TV without damaging the wall?

Any bolt through mount makes holes, but the damage is minimal and easily patched if you ever move it. The mounts in this guide all fix into timber studs, brick or concrete and are not rated for plasterboard alone. For a damage free option you would need a TV stand or a no stud bracket system, but for a large TV a proper structural fixing is far safer.

How do I know if a wall mount fits my TV?

Check three numbers: your TV's screen size in inches, its weight in kilograms, and its VESA hole pattern in millimetres. Then confirm all three fall within the mount's stated range. Most listings show the supported screen size, the maximum load, and the VESA range, so match each one before you buy.

Do TV wall mounts work on brick walls in Australia?

Yes, and brick is often the most secure option. You fix into the masonry with the correct masonry anchors rather than into studs, which means stud spacing stops mattering. Several mounts in this guide supply concrete anchors on request rather than in the box, so order them ahead if your wall is brick or double brick.

How high should I mount my TV?

A common guide is to have the centre of the screen at or slightly above seated eye level, which for most lounges puts the middle of the TV around 100 to 110cm from the floor. If you have to mount higher, such as above a fireplace, choose a tilt or full motion mount so you can angle the screen down toward the couch.

Are cheap Amazon TV mounts safe?

A well rated mount fixed correctly into solid structure is safe regardless of price. The brackets here carry thousands of verified ratings and clear weight limits. The risk in any mount, cheap or expensive, is a poor wall fixing, so the money is better spent on the right anchors and a stud finder than on a premium brand name.

About the author

Anish Puri founded NestPath in 2026 after going through the Australian first-home-buyer process himself. NestPath focuses on Australian first-home buyers because the existing review sites are American, generic, or both. Anish handles editorial selection across the homeowner hub. Reach out: hello@nestpath.com.au